Keevitusaparaat (MMA, MIG MAG), Rogue EM 180

E-poes saadaval 2tk. Juurdetellimise võimalus puudub. ESAB Rogue EM 180 is an inverter-based MIG keevitamine system designed to address all your keevitamine project needs, from light fabrication to parandus ja maintenance. system OMADUSED industrial-grade arc performance ja full featured kontrollib that allow welder to peene tune arc characteristics based on materjal they are keevitamine.
koos a weight of only 16.2 kg, 230 V single-phase Sisend ja compatibility koos 10 kVA generators, this system pakub maximum flexibility ja portability, both in shop ja in field.

suur 14 Segment Display –instantaneous feedback for both voldid ja wire feed speed for clear viewing
Synergic Weld Programs –full range of keevitamine parameters, 0.5 –8.0 mm koos single nupp control
Power Factor correction (PFc) –ensures a stabiilne arc, vastupidav to power fluctuations even while töö on long pikendus kaablid kuni 100 m
ainulaadne rugged industrial disain –supporting multiple lift points ja kaabel management
Arc Dynamics –fine tune arc characteristics for a crisp/stiff arc for carbon teras või a sile/soft arc for roostevaba teras
Spool Gun Ready –Rogue automaatselt configures komplekt up kui spool gun is connected
IP23S rated siseseks/outdoor kasutus

voldid: 230 VAc 1, 50/60 Hz
GMAW keevitamine väljund:
180 A / 23 V @ 25 % Duty cycle
116 A / 19.8 V @ 60 % Duty cycle
90 A / 18.5 V @ 100 % Duty cycle
SMAW keevitamine väljund:
150 A / 26.0 V @ 25 % Duty cycle
97 A / 23.9 V @ 60 % Duty cycle
75 A / 23.0 V @ 100 % Duty cycle
current Range: 30-190 A
voldid Range: 12-26 V
Wire Feeder Näitajad: 2.0-16.5 m/min
Open circuit voldid: 78 VDc
roostevaba teras: 0.6-1.0 mm
cored juhe 0.8-1.0 mm
alumiinium: 0.8-1.0 mm
Mild teras: 0.6-1.0 mm
Max Spool diameeter: 100 & 200 mm
Power Factor at Maximum vool: 0.8
Efficiency at Maximum vool: 82.7 %
Energy Save Mode: 20 W
KASUTUS Temp: -10 - +40 °c
Enclosure klass: IP23S
Sertifikaat: cE
Mõõdud, L x W x H: 590 x 220 x 385 mm

PARcEL_LOcKER	NO