Universal polyester putty yellow matt 700G + hardener

 
 
 
Täitepolüesterpahtel

2K filled polyester putty for a car repair.
* indicates very good adhesion with metal.
* easy mix and to apply.
* Head lihvimisomadused.
paint - yellow.
Läikeaste – Matt.
density – 1,94 (+/- 0,03) kg/l.

surface ETTEVALMISTAMINE
product is very good adhesion different surfaces. it can apply.
* not coated steel and aluminium after tasandamist and grease removal.
* zinc plated steel after tasandamist and grease removal.
* grinded Glass Fibre (GFK/GRP), polüesterpahtlid, acrylic- and epoksükrundid and olemasolevad in good condition covers
* well grinded old or tehases kate.
* wood after kuivatamist and grease removal.

Caution: don't Apply straight reaktiivsetele kruntvärvidele, 1K akrüülile and nitrotselluloosile.

Segamissuhe weight Follow Putty 100 pc + 2 pc hardener

mix carefully, up to saadakse homogeenne paste. Olge ettevaatlik, et not broom õhusulused.

layer thickness
Kitti may to apply several thin layer. after each layers product peaks to dry. thickness not allowed ületada 3 mm
Serviceable life 20oC at on 5÷6 minutes
Kõvenemise time 17÷27 minutes 20°C at.
temperature alla 20°C prolongs significantly kõvenemisaega.

IR kuivatamine
9÷11 minutes lühilaineid. don't exceed temperature 80 degrees oC.
zinc plated surfaces puhul not allowed temperature ületada 60oC.
Caution: wait approximately 5 minutes before IR-kuivatusprotsessi.
grinding
- rough grinding (dry): P80÷P120,
- Viimistluslihvimine (dry): P120÷P320.

Polüesterpahtleid saab over to cover:
* 2K polüesterpahtlid.
* 2K polüesterpihustustäiteained.
* 2K akrüültäiteaineid.
* 2K epoksütäiteained.

ÜLDMÄRKUSED
* excessive kõvendikogus põhjustab pealisvärvi pleegitamisel probleeme!
* 2K toodetega working is recommended to use isikukaitsevahendeid. to protect to eyes and hingamisteid.
* clean püstolid and equipment immediately after using.
* Ruumid peaksid be well ventileeritud.