polyester putty light 250g + hardener
501 UNIVERSAL MEDIUM-GRAINED PUTTY
501 Universal middle teralisusega Putty
is used alusmaterjalina surface asperities for filling
different materjalidega haakub well
no Leave poore
no clog grinding ajal abrasive materials
light gray paint
holes and ebaühtlaste alade for filling, eeltöödeldud surfaces to apply car body parts and other metallic surfaces, like for example. trepid, connectors and screws paigutamiseks etc
Application areas:
Kohaldatav zinc plated lehtedele, for the aluminium and It's alloys, pipe, terasplaatidele, for wood, for concrete. Chamaeleon Universal keskmiseteraline polyester putty on 2-component polüestertäidise Putty middle elastsusega, high reaktsioonivõimega, aminorõhuga kiirendatud polüestervaigu and different mineral, keskkonnasõbralike fillers seguna.
quality and Features:
work lihtsus
high elasticity
on big surface steady and poorivaba hajutatavus
easy lihvida also after pikemat perioodi
good stability even vertikaalsel surface
suitable for kuumutatava emailiga for coating
any more do not have to eristama selliseid surfaces, like zinc plated, Hot-dip galvanized or aluminium
durable nõrkadele against acids and alustele, propellentidele, for solvents, for water and jäätõrjesoolale
Technical Features:
stand: Polyester Resin mineral täiteainetega
paint: grey
odor: stürool
Consistency: soft, tiksotroopne, pastataoline
Serviceable life / operating time at temperature 20 ° C: approximately 4
Working temperature: min. 12 ° C
drying time (at temperature 20 ° C, 50% suhteline õhuniiskus): saab lihvida u. 20-30 minutes
hardener lisamine: 2 - 4% (optimal mixture 2,5%)
Kõvastunud material temperature resistance: 120 ° C
use:
before using read carefully etiketil olevaid hoiatavaid tekste and järgige neid!
Objekt, what soovite improve, peaks be stainless, clean, dry, rasvavaba and grinded.
take required pc pahtlist purgist out and mix this well corresponding quantity hardener.
Apply mixed material desired layer thickness.
clean tools immediately after using, if necessary nitro-vedeldiga.
don't tagastage mixed material botlle.
after u. 20–30 minutes saab repaired spaces to bore, lihvida (sandpaper blades 80–240), saagida and to paint.