2 in one tihendusmass RTV sealant and Stone guard grey 1L

product is based rubber and Synthetic vaigul, which is intended for autokerede protection mehaaniliste damage, rust and weather conditions harmful influences eest and also liite- and keevisõmbluste for sealing pihustuspüstoli abil. Hermeetikul on also heliisolatsiooni Features. after drying may to cover all tavapäraste värvisüsteemidega.
FÜÜSILISED and KEEMILISED Features

density*: 1,21 – 1,25 kg/l
Efficiency factor: ± 0,7 kg/m2 (± 600 µ wet layer)
Temp. durability (after kõvenemist): -25C up to +80C
viscosity (Brookfield)*: 4250 m.Pa.s
drying time*:
Touch dry: u. 45 min. (± 700 μ)
fully dry: u. 3,5 h. (± 700 µ)
* temp. 20C, RH 65%

use
stone chips vastane kate
coated surface black be clean, dust-, grease- and stainless.
before using shake botlle properly.
product can apply by using gun õhurõhuga 3-6 baari.
recommended pihustuskaugus on approximately 30 cm.
Kui soovitakse saada paksem kate, is recommended kihte vahepeal to dry.
equipment and contaminated surface may freshly to clean lahustitega. after kõvenemist saab product to remove only mechanically.
depending on cover thickness, approximately 60 - 90 minutes has passed may surface to cover kahekomponentsete 2K colours or alusvärvidega. before 2k paints using is recommended to use kruntvärvi according to paints tarnija instructions.

Veekindlaks tegemine
coated surface black be clean, dust-, grease- and stainless.
before using shake botlle properly.
product can apply by using gun õhurõhuga 2-4 baari.
recommended pihustuskaugus on approximately 1-2 cm.
Kui soovitakse saada paksem kate, is recommended kihte vahepeal to dry.
equipment and contaminated surface may freshly to clean lahustitega. after kõvenemist saab product to remove only mechanically.
depending on cover thickness may ca 3 tunni after surface to cover 2k or alusvärviga. before 2k paints using is recommended to use kruntvärvi according to paints tarnija instructions.