kõvade plastics glue 20ml use: ABS; EVA; PCV; PUR; TR

Nimi: gel PP, PE .
gel PP and PE ., which is intended to all materials, nii elastic and also kõvade, to connect, siledate surfaces and porous materjalidega, which is manufactured polüetüleenist PE, polypropylene PP and even "teflon" PTFE. this product consists of New Generation tsüanoakrülaatgeeli liimist and Primerast, which is intended to difficulty adhesively bonded plastics surface for bonding. 
Primera aktiveerib difficulty adhesively bonded materials surface, due to which glue jaotub evenly and after kõvenemist saadakse high tugevuse parameetrid. glue ennast is characterized by big nihke- and rebimistugevus
to work at temperature -55oC up to + 80oC, good durability vananemisele and agressiivsetele chemicals.
Features:
• Kohene
• clear
• Waterproof
• durable ilmastikutingimustele
• aging resistant
• Kemikaalikindel
• may to paint
• no jookse vertikaalsetelt surfaces off

application
materials: polüolefiinid (PP - polypropylene, PE - polyethylene, PTFE - "teflon"), silikoonkumm, metal, aluminium, glass, rubber, plastic (plastic, for example PVC, ABS etc), wood, ceramics (fajanss, portselan) etc), leather, cap, stone, paper, cardboard.

Rakendusnäited:
• Liimimudelid and polüetüleenist maketid
• PVC -plaastri kleepimine kasvuhoone damaged PE -fooliumile
• Polüolefiinist mänguasjade (PP, PE) liimimine
• Küljepeegli body, car bumber protector repair
• PP, PE manufactured kodumasinate and RTV body repair
• plastic garden furniture repair
• Polüetüleenist templite liimimine glass metal with holder
• Kõrvaklappide damaged for plastic parts repair
• broken kayaks repair
• inside core liimimine

surface making
glued surfaces peaksid be:
• clean
clean glued surfaces nii, et neil no oleks dirt neither saastumist (dust, grease). glued elements liimimistugevuse for repairing rub neid lightly sandpaper, then remove thoroughly from dust and rinse technical rasvaärastusvahendiga.
• dry
dry cleaned surfaces.

TINGIMUSED
• best liimimistulemused will be achieved at room temperature and suhtelise õhuniiskuse 50-60% at.

use
1. Apply glued surfaces kruntaine layer.
• don't kruntige easily adhesively bonded plastics (for example metal, PVC) surfaces, beacuse you can vastupidise efekti.
2. wait 3 minutes.
• It's aja jooksul evaporates praimerist solvent thoroughly.
3. Liimitoru esmakordsel avamisel Punch cap ülaosaga pipe Membrane through.
4. Apply thin liimikiht for one ühendatavale surface.
• don't väljastage liiga much glue, sest what smaller on glue quantity, it stronger on side.
5. Ühendage elements immediately, push and keep a few second all.
• don't liigutage neither parandage ühendust.
• glue initial ristsidumise time on pair seconds, depending on glued material and keskkonnatingimustest.
6. leave glued element 24 tunniks fully to dry.
7. after glue using clean applicator thoroughly with dry with cloth glue jäänustest, clean head and close pipe.

advice and MÄRKUSED
• Kui teil on kahtlusi, kas this material on raske siduda, you can teha one järgmistest testidest:
1) Apply Acetone katsetamata plastic surface silmapaistmatusse spaces -kui material is not damaged (stained), on tegemist difficulty liimitava materials.
2) Liimige katsetatavale to the material silmapaistmatus place kummitükk or other easily sticky material-kui element doesn't stick and dried glue black material from surface off, on this also difficulty adhesive material.
3) Kastke element vette. Polüolefiinide erikaal on smaller kui in the water and these hõljuvad in the water. water valati polüolefiini aglomeraatide surface tilkadeks.
• Liiga high moisture liimimise ajal or liiga thick liimikiht may cause "smoke" efekti, this tähendab white õitsengute formation connected materials surfaces.

• what õhem on liimikiht, it lühem on kõvenemisaeg and it bigger on sideme strength.
• don't unustage after glue applying glued elemente fast and otsustava touch to connect, without parandamisvõimaluseta.
• Olge in gluing ettevaatlik. eliminates leather in seconds. contaminated hands leotatakse warm seebivees and kui clothes forms stains, use tsüanoakrülaatkatte eemaldajat. P-093.

Technical specifications
sticky stand: etüül-2-tsüanoakrülaat
primer stand: organic ühendite mixture
sticky paint: clear
connection paint: clear
Consistency: glue: gel, praimer: fluid
Liimitihedus: glue: 1,1 g / cm3 , primer: 0,7 g / cm3
glue viscosity (25oC): 90 000 - 130 000 cP
Esmane kõvenemisaeg: <60s
full kõvenemisaeg: 24 hours
starting from temperature resistance: -55 ° C ÷ 80 ° C
PE -plaatide nihketugevus:> 3 MPa
rolls purunemistugevus:
PE-PE 4-5 MPa
PTFE-PTFE 5-7 MPa

maximum fulfillable tühimik: 0,25 mm
HOIUSTAMINE
• to keep densely CLOSED anumas at temperature 0 ° C up to 25 ° C. lower
temperature, it longer on glue durability.
• to protect moisture and from cold.
• glue you can to keep with other toodetega.
• to keep for children unreachable!