hard plastic glue 20ml with primer, Suitability: kunstlikud materials, use: PE; PP; PTEE; SI

PP Polüpropeen (Polypropylene) - and PE Polüeteen in other words polyethylene glue,  is used difficulty kinnitatavate plastics to connect, nn polüolefiinid (PP, PE), termovormitud elastomeerid, silicone, sarnased plastics, teflon and their kombinatsioonid other materjalidega. Nendel materjalidel on suhteliselt väike pinnaenergia and high chemical durability. these polüolefiinide Features make surface with adhesive wet. liquid glue works like drop water õlisel surface. after kõvenemist pole liimil praktiliselt mingit adhesiooni their materials surface. Selleks, et nad saaksid together to stay, is used selleks pinnaaktiveerimist and elleks loodi product, which contains New Generation tehnilist tsüanoakrülaatliimi and krunti. primer ülesanne on  difficulty adhesively bonded plastics surface aktiveerimine nii et glue jaotuks evenly and after kõvenemist saadakse high tugevuse parameetrid. glue ennast is characterized by high nihke-, and rebenemistugevus
Works at temperature -55oC up to + 80oC, good durability vananemisele and agressiivsetele chemicals.
Functions:
• fast
• clear
• Waterproof
• durable ilmastikutingimustele
• aging resistant
• Kemikaalikindel
• can paint

KOHALDAMINE
materials: polüolefiinid (PP - polypropylene, PE - polyethylene, PTFE - "teflon"), silikoonid, metal, aluminium, glass, rubber, plastid (plastic, for example PVC, ABS etc), wood, ceramics (fajanss, portselan, etc.), leather, cap, stone, paper, cardboard.

Rakenduse näited:
• Polüetüleenmudelite liimimine
• PVC plaastri kleepimine kasvuhoones damaged PE-fooliumile
• polüolefiinist mänguasjade liimimine (PP, PE)
• side mirrors body, car bumber protector repair
• Kodumasinate korpuste repair, RTV manufactured PP-st, PE-st
• plastic garden furniture repair
• Polüetüleenist templite fixing prillide metallhoidiku mounting
• Kõrvaklappide damaged for plastic parts parandamine
• Pragunenud PP kayaks repair tugevduse liimimisega
• Saekesta liimimine

surface ETTEVALMISTAMINE
glued surfaces peaksid be between sobitatud - this ensures highest mechanical tugevuse.
•  clean glued surfaces nii, et neis no oleks dirt neither saastumist (dust, grease). then rinse with cleaner Technical Degreaser or Technicqll.
•Kuivatage cleaned surfaces.

TINGIMUSED
• best liimimistulemused will be achieved at room temperature and 50-60% suhtelise õhuniiskuse at.

use
1. Apply glued surfaces thin steady krundikiht.
• don't kruntige easily adhesively bonded plastics, for example metal, PVC, surfaces, sest you can vastupidise efekti kui intended to.
2. wait 3-4 minutes.
• It's aja jooksul evaporates krundist solvent thoroughly.
3. Apply for one ühendatavale surface with brush thin layer glue.
• don't väljastage liiga much glue, sest what smaller on glue quantity, it stronger sideme you can.
4. Ühendage elements immediately, push and keep pair seconds all.
• don't liigutage neither parandage ühendust.
• glue initial ristsidumise time on pair seconds, depending on glued material and keskkonnatingimustest.
5. leave glued element fully tahenema (24 hours)

NÕUANDED and MÄRKUSED
• Kui teil on kahtlusi, kas this material on raske siduda, you can teha one järgmistest testidest:
1) Apply atsetooni testitava plastic surface silmapaistmatus place
- kui material pole damaged (stained), siis on tegemist difficulty liimitava materials.
2) Kleepige testitavale osale silmatorkamatus place kummitükk or other easily sticky material - kui element doesn't stick and dried glue black material from surface off, on this also difficulty attachable material.
3) Kastke element vette. Polüolefiinide erikaal on smaller kui with water and these hõljuvad in the water. Polüolefiini aglomeraatide surface alloy water tilkadeks.
• Liiga high moisture or liiga thick liimikiht may cause "smoke" efekti, this tähendab white õitsengute formation connected materials on surfaces.
• what õhem on sticky layer, it lühem on tahkestumisaeg and it bigger on sideme strength.
• don't unustage after glue mounting glued elements quickly and otsustavalt liigutada, without et neid oleks possible improve.
• product on contains vulkaniseeritud rubber patch, what Can be used kinnitusvahendina, et increase keevisõmbluse durability to the vibration and stressile.
• in gluing olge ettevaatlik. eliminates leather in seconds. contaminated hands leotatakse warm seebivees and riietel olevate stains korral use tsüanoakrülaatkatte remover  no. P-093.

Technical specifications
sticky stand: etüül-2-tsüanoakrülaat
primer stand: ühendite mixture orgaanilises
Liimivärv: clear
connection color: clear
Consistency: glue: fluid, primer: fluid
Liimitihedus: 1,1 g / cm3
primer density: 0,7 g / cm3
sticky viscosity (25oC): 40-60 cP
initial kõvenemise time: 2-10 seconds
full kõvenemise time: 24 hours
temperature resistance: -55 ° C - 80 ° C
PE-plaatide nihketugevus:> 3,0 MPa
rolls purunemiskindlus:
PE-PE 4-5 MPa
PTFE-PTFE 5-7 MPa

maximum fulfillable gap: 0,1 mm
storage
• to keep densely CLOSED anumas at temperature 0 ° C up to 25 ° C. what lower temperature, it longer kleepainet it's enough.
• Kaitske moisture and from cold.
• glue you can to keep with other toodetega.
• to keep for children unreachable!
EAN-code 5902051001935