TROTON-RUST FILLER Rust treatment primer rust remover 100ML

Goods available only in e-shop

8,70€
Delivery: home 3-4wd
ADD TO BASKET
Products ID: 513902
Partnumber: 300004053 TRO
Brand: TROTON
https://i.ak24.ee/mf/medium/troton.jpg
RUST FILLER on active anti corrosion and primer in one. this protects metallelemente further against corrosion, eliminates rust and creates protective kruntvärvi, valmistab rusted surface edasiseks for treatment. product dries quickly, it on easy to use and it is very durable for solvents.
formulation may apply corroded places, to clean only lightly kleepuvast rust.
may with water mix.
FÜÜSILISED and KEEMILISED Features
beige paint
odor: nõrk
density *: approximately 1,02 g / cm3
viscosity *: 10-16 sec. (Fordi 4 mm cup
PH value *: 2.2
coverage 100 ml: approximately 2 m2
drying time *: 6 - 8 hours
* 200 at
C and suhteline õhuniiskus 50%

use:
clean traatharjaga damaged ala dirt and lahtisest rust.
before using shake the bottle properly.
Apply preparaat evenly rusted surface.
depending on korrosiooniastmest is recommended apply 3-4 layers product.
before further töötlemist wait, up to reaktsiooniaeg on möödas, up to surface changes siniseks - mustaks.
straight kaitstud surface saab apply following:
- acrylic paint not earlier kui approximately 3 hours after last layer applying.
- Putty (nii grinded and also lihvimata surface), but not earlier kui approximately 3 hours after last layer applying.
- spray akrüüllvärvi (protection against corrosion, cover durability and lõpliku efekti seisukohalt is recommended to use interlayer akrüülkruntvärvi).
best lõpptulemuse to achieve is recommended:
- before akrüülkruntvärvi has been applied straight kuivatatud Rust Filler kihile, lihvige surface gently thin with paper, for example P320 dry, then remove dust (you can it gently with silicone remover wipe) and Apply peale acrylic paint.
- before pihustuskatte applying straight kuivatatud Rust Filler kihile karestada surface dry P500 with paper or moisture P1000 - P1200 with paper.
- before putty has been applied straight kuivatatud Rust Filler kihile dry surface sandpaper P150 - P180.
recommendations: to use only well ventilated place or outside.
Note: safety to ensure järgige always Product ohutuskaardil this teavet.
HOIUSTAMINE
to keep at temperature 10 ÷ 250
C and suhteline õhuniiskus max 60%.
to protect cold and otsese päikesevalguse eest.