täitekrunt Polyester color: olive PROTECT 380 1+1 NOVOL 0,8L hardener 0,08L

Täitekrunt / spary putty

Features
PROTECT 380 – Pneumaatilise spraying way portable Polyester finishing putty. after hardener segamist reaches product pihustusviskoossuse, without et it is needed additional solvents. unique indicator võimaldab hinnata mixture valmisolekut (oliivivärvi helebeežiks muutumisel on product pihustamisvalmis), to check components segamise põhjalikkust. Võimaldab to achieve high täiteastme, leaving smooth surface even very in big aladel.
Lihvimisvalmis u. 1,5 hours 20°C at (it can reduce kuumutades max 60°C-ni). product is intended for masinlihvimiseks, also by hand for ginding peeneteralise abrasiivpaberiga.

Acceptable aluspinnad:
old värvikatted Rasvatustamine, kuivlihvimine P220 – P280-ga, rasvaärastus again.
Polüesterpahtlid Kuivlihvimine P240-ga, rasvatustage again.
Epoksiidkrundid Matistamine and rasvaärastus. Kui is used NOVOL epoksükrunti, Apply filler peale at least 4 hours after epoksükrundi applying.
steel, zinc plated steel and aluminium Kruntige fully grinded and rasvatustatud aluspinnad PROTECT 360 epoksükrundiga. leave at least 4 tunniks and cover PROTECT 380-ga.
Plastid, except PE, PP and PTFE. treat rasvaeemaldusvahendiga PLUS 780, matt abrasiivse viimistluspadjaga, rasvatustage again.
Kahekomponentsed akrüültäiteained Rasvaärastus, kuivlihvimine P220 – P280-ga, rasvatustage again.

Note: don't Apply PROTECT 380 straight happekrundile, ühepakendilistele akrüültoodetele or nitrotselluloostoodetele. don't Apply straight steel, zinc plated steel neither for the aluminium.

SEGAMISSUHE
Mahu ratio
PROTECT 380 100ml
CETOX-12 OB (red) hardener 10ml

weight ratio
PROTECT 380 100g
CETOX-12 OB (red) hardener 6.5g


Kruntvärvi is recommended apply at temperature over 10°C and õhuniiskusel not over 80%.

application
common raskusjõuga pihustuspüstol
Caution: Device manufacturer Specifications black vastama.

head 1,6 – 1,8 mm
pressure 3-4 baari
distance 15-20 cm

layers number 1–3
one märgkihi thickness Umb. 150 μm
ready to use mixture this with dry layer thickness in the range of 1L= 6,0m2 100 μm at
maximum layer thickness ca. 300 μm

mixture lifetime 20°C at 17–25 minutes
Caution: short lifetime because of mix components immediately before applying.
layers vaheline vilkumisaeg 20°C at 2–4 minutes
Drying time 20°C 70–90 minutes 60°C 20 min
Caution: Kõvenemisajad kehtivad üksikute elements temperatures in a ratio.

Alustage IR-kuumutamist not earlier kui 10 minutes after last layer applying.
time depending on Lamp tüübist and võimsusest. Järgige Device manufacturer recommendations
10–20 min


only kuivlihvimine rough P180–P240 finish P240–P320
paint
olive

KATMINE:
most kaubanduslikke acrylic- and epoksükrundid
Isoleerige polüesterkrunt PROTECT 380 acrylic- or epoksü kruntvärviga before pealisvärvide applying.

equipment cleaning
THIN 880 sprayable filler vedeldi or NC solvent.

additional information