ProfiRS fast acrylic primer täitekrunt new composition 4:1 paint black capacity 1.25 L set hardener
Goods available only in e-shop
24,90€
Delivery: home 3-4wd
ADD TO BASKET
quickly drying 2-component acrylic paint. it has very good rakendusomadused - Excellent
current and fill. perfect fast and väikeseks for repair. product offers very good protection , on
anticorrosive. adheres steel, aluminium, zinc plated aluspindadega and polüesterlaminaatpinnaga and polüesterpahtlitega coated surfaces. intended by hand and gun to apply kuivtöötlemiseks and märgtöötlemiseks.
KUIDAS to use:
Parandatav surface black be clean, dry, matt and rasvatustatud. A + B mixture measurement mahu Follow:
4 mahuosa krunti (A) and 1 mahuosa hardener (B). Apply pihustuspüstoliga (head 1,6 - 2,2 mm) 1–3 layer, 5–7 -minutilise pausiga solvent aurustamiseks before next layer has been applied.
sprayer viscosity
DIN cup 4 mm (20oC) 25-30s
use
Spray gun gravitatsiooni:
nozzle: 1,6 - 2,2 mm
working pressure according to gun manufacturer soovitustele
layers number time 1–3
evaporation time 5–7 min
layer thickness 55–60 µm
layer thickness 55–180 µm
Recommended kasutustingimused:
temperature 18 - 22oC, moisture 40 - 60%
Teoreetiline coverage 10 m2 /L (layer thickness 60 μm)
operating time (20oC) up to 1 h
drying:
+ 60C 15 - 20 min
+20C 2,5 - 3 h
IR drying:
short and average laine: 12 - 15 min
Järgige IR -Lamp manufacturer recommendations.
before kuivatamist keep välklampi out.
Kuivlihvimine:
P400 - P600
Märglihvimine:
P800 - P1000
KOMMENTAARID:
Viige product sundimatult recommended pealekandmistemperatuurile (Avoid soojendamist/jahutamist). Product, eseme and keskkonna temperature peaks be approximately 20oC.
HOIUSTAMIS- and TRANSPORDITINGIMUSED:
to protect cold, kuumuse, päikesevalguse and moisture eest. to keep densely suletuna in dry place,
cool area.
recommended säilitustemperatuur: +10 up to + 30oC.
current and fill. perfect fast and väikeseks for repair. product offers very good protection , on
anticorrosive. adheres steel, aluminium, zinc plated aluspindadega and polüesterlaminaatpinnaga and polüesterpahtlitega coated surfaces. intended by hand and gun to apply kuivtöötlemiseks and märgtöötlemiseks.
KUIDAS to use:
Parandatav surface black be clean, dry, matt and rasvatustatud. A + B mixture measurement mahu Follow:
4 mahuosa krunti (A) and 1 mahuosa hardener (B). Apply pihustuspüstoliga (head 1,6 - 2,2 mm) 1–3 layer, 5–7 -minutilise pausiga solvent aurustamiseks before next layer has been applied.
sprayer viscosity
DIN cup 4 mm (20oC) 25-30s
use
Spray gun gravitatsiooni:
nozzle: 1,6 - 2,2 mm
working pressure according to gun manufacturer soovitustele
layers number time 1–3
evaporation time 5–7 min
layer thickness 55–60 µm
layer thickness 55–180 µm
Recommended kasutustingimused:
temperature 18 - 22oC, moisture 40 - 60%
Teoreetiline coverage 10 m2 /L (layer thickness 60 μm)
operating time (20oC) up to 1 h
drying:
+ 60C 15 - 20 min
+20C 2,5 - 3 h
IR drying:
short and average laine: 12 - 15 min
Järgige IR -Lamp manufacturer recommendations.
before kuivatamist keep välklampi out.
Kuivlihvimine:
P400 - P600
Märglihvimine:
P800 - P1000
KOMMENTAARID:
Viige product sundimatult recommended pealekandmistemperatuurile (Avoid soojendamist/jahutamist). Product, eseme and keskkonna temperature peaks be approximately 20oC.
HOIUSTAMIS- and TRANSPORDITINGIMUSED:
to protect cold, kuumuse, päikesevalguse and moisture eest. to keep densely suletuna in dry place,
cool area.
recommended säilitustemperatuur: +10 up to + 30oC.
28,30€
ADD TO BASKET
Delivery: home 3-4wd
The data shown here, especially the complete database, may not be copied. It is strictly prohibited to duplicate the data and database and distribute the same, and/or instruct third parties to engage in such activities, without prior consent from TecAlliance. Any use of content in a manner not expressly authorized constitutes copyright infringement and violators will be prosecuted.
