mipa 1k epoksiidkruntvärv grey 400ml/ae (pro)
Goods available only in e-shop
10,20€
Delivery: home 3-4wd
ADD TO BASKET
Saksamaal MIPA tehases manufactured 1K EP-Primer epoksiidkruntvärv in aerosol container. Helehalli paints. corrosion konserveeriv and against rust protective. suitable for haljale teraspinnale. keevisõmblustele. zinc plated surface. alumiiniumpinnale etc. well knitting and evenly and densely covering. fast drying. special pihustuskork ensures steady and probleemivaba paint layer. Proffikvaliteet Saksamaalt!
Kohaldatav old grinded to paints and poe kruntidele or straight steel, aluminium and zinc plated aluspindadele. Mipa 1K-Epoxy-Primer-Spray ensures fast drying and excellent grinding. very fine spraying võimaldab product to implement kohaparandusalal, without leaving üleminekuvööndisse jämedaid ülepihustamislaike. Vahepealse grinding time decreases therefore significantly.
Aluspinnad:
not coated steel and aluminium substraadid, zinc plated aluspinnad or untreated old 2K-värvikihid. don't Apply termoplastsetele aluspindadele.
Eeltöötlus / cleaning:
lihvige and puhastagepind prior with silicone remover
Features
quickly drying
Excellent lihvitavus
very big stuffing properties
durable silikoonieemaldajale
Excellent protection against corrosion
silmapaistev adhesiveness
very high moisture isoleeriv effect
very low pihustusudu and ülepihustamine fading tsoonis
may to cover all solvents or water based one- or kahekomponendiliste pealisvärvidega
paint / gloss:
level: grey / matt
preparation: before using shake!
use: spray for testing - pihustuskaugus u. 20 - 30 cm
2 - 3 layer, with dry film thickness 40-50 µm.
Ooteag: 3 - 5 min. each cover vahel
after using: Turn Can backwards and spray, up to sprayer on clean, this prevents sprayer clogging.
Drying time:
dust dry: u. 5 min
Touch dry: after u. 10 min
again katmine: after u. 30 min
grindable: after u. 30 min
Järgnev töötlemine
Kuivlihvimine: P 400 - P500
wet grinding: P 800
use starting from + 10 ° C and up to 80% suhtelise õhuniiskuse at.
don't cover Polyester-pritspahtliga.
Kohaldatav old grinded to paints and poe kruntidele or straight steel, aluminium and zinc plated aluspindadele. Mipa 1K-Epoxy-Primer-Spray ensures fast drying and excellent grinding. very fine spraying võimaldab product to implement kohaparandusalal, without leaving üleminekuvööndisse jämedaid ülepihustamislaike. Vahepealse grinding time decreases therefore significantly.
Aluspinnad:
not coated steel and aluminium substraadid, zinc plated aluspinnad or untreated old 2K-värvikihid. don't Apply termoplastsetele aluspindadele.
Eeltöötlus / cleaning:
lihvige and puhastagepind prior with silicone remover
Features
quickly drying
Excellent lihvitavus
very big stuffing properties
durable silikoonieemaldajale
Excellent protection against corrosion
silmapaistev adhesiveness
very high moisture isoleeriv effect
very low pihustusudu and ülepihustamine fading tsoonis
may to cover all solvents or water based one- or kahekomponendiliste pealisvärvidega
paint / gloss:
level: grey / matt
preparation: before using shake!
use: spray for testing - pihustuskaugus u. 20 - 30 cm
2 - 3 layer, with dry film thickness 40-50 µm.
Ooteag: 3 - 5 min. each cover vahel
after using: Turn Can backwards and spray, up to sprayer on clean, this prevents sprayer clogging.
Drying time:
dust dry: u. 5 min
Touch dry: after u. 10 min
again katmine: after u. 30 min
grindable: after u. 30 min
Järgnev töötlemine
Kuivlihvimine: P 400 - P500
wet grinding: P 800
use starting from + 10 ° C and up to 80% suhtelise õhuniiskuse at.
don't cover Polyester-pritspahtliga.
56,40€
60,70€
-8%
ADD TO BASKET
Delivery: home 3-4wd
22,80€
ADD TO BASKET
Delivery: home 3-4wd