anticorrosive Epoksiidkrunt grey PROTECT 360 0,4L + hardener H5950 (1 + 1)

anti rust epoksükrunt

PROTECT 360 EPOXY PRIMER – anticorrosive primer, which protects excellently teraspindu kvaliteetsete resins and active anti corrosion additives abil. intended passenger cars, intensely used truck and busses/reisibusside renovating.
product is very good adhesiveness different aluspindadega and great isolatsiooniomadused. it is straight kaetav pealisvärvidega.
Kruntvärvi may to use segamissuhtes 1+1 hardener H 5950, ratio 1+1, Can be used wet wet System.

suitable for aluspinnad:
steel- clean teraspinnad up to Sa 2 1/2 (wet Sandblasting Gun) or St 3 (by hand cleaning or electrical tools   according to PN-ISO 12944-4 standard; surface after töötlemist black be clean from oil, from grease, from dust, lahtisest from old värvikattest, veskist, rust and võõrsaasteainetest; surface black be metallsubstraadi gloss.
old värvikatted - Rasvasus to remove and to dry with paper P220 – P360.
Polüesterpahtlid- Kuivlihvimine, lõpplihvimiseks use P240–P320.
aluminium- Rasvasus to remove, kuivliivapaber P280 ÷ P360 or matt abrasiivse viimistluspadjaga, Rasvasus to remove again.
zinc plated steel -Rasvasus to remove and matt thin abrasiivse viimistluspadjaga. Rasvasus to remove again.
stainless steel - Rasvasus to remove and matt abrasiivse viimistluspadjaga. Rasvasus to remove again.
Polüesterlaminaadid- Kuivliivapaber P280-ga, Rasvasus to remove again.
SEGAMISSUHE
Mahu ratio
PROTECT 360 1 pc
H 5950 1 pc
weight ratio
PROTECT 360 100 pc
H 5950 56 pc

application

hardener
H5950
Segamissuhe 1+1
one with dry layer thickness 25–35 μm
recommended layers number 2–3

Caution: Kui epoksükrunt on ainus anticorrosive primer värvikihis, black It's minimum thickness be 80 μm.
ready to use mixture saagis .
this with dry layer thickness interval
1+1 System .: u. 4,2 m2/l 80 μm at

Tegelik coverage depends surface kujust, karedusest and kasutusparameetritest.

mixture lifetime 20oC at 4 h

layers vaheaeg 20oC at 5–10 min
Kruntvärvi is recommended apply at temperature over 15 C and õhuniiskusel not over 80 %.°

Drying time
20°C 12 h
60°C 45 min
Caution: Kõvenemisajad kehtivad üksikute elements temperatures spaces.
IR KUIVATAMINE
distance time depending on Lamp tüübist and võimsusest
Järgige Device manufacturer recommendations
10–20 min

Caution: Alustage IR-kuumutamist not earlier kui 10 minutes after last layer applying.

grinding
Kuivlihvimine P360–P500
Märglihvimine P600–P1000
KATETAVUS
may to cover all NOVOL akrüülkruntvärvide and pealisvärvidega. Kaetav pealisvärvidega 45 minutes has passed, kui kruntkihi thickness on 80 μm. Katmise maximum time without unmatted on 48 hours.

additional information