Fibreglass Putty 0,5kg + hardener

2 component putties is manufactured on a base of polyester resins, which ensure head adhesion properties with different materials.
•    is used as filling deep dents and corroded components korral.
•    good mechanical duration and elasticity 
•    Võimaldab to cover high surfaces one at once leaving surface smooth easier aftertreatment .

Keskkonnasõbralikud täiteained.

Application areas:
automotive industry, machinerys construction etc
suitable for metal, for wood, for concrete, klaaskiule, reinforced plastics.

quality and Features:
work lihtsus
big elasticity
very well hajutatav, as result on smooth surface
easy lihvida also after pikemat perioodi
good stability even vertikaalsel surface
suitable for also zinc plated, Hot-dip galvanized or aluminium surfaces
durable nõrkadele against acids and alustele, fuels, for solvents, for water and jäätõrjesoolale
asbestos- and silicone-free

Technical Features:
stand: Polyester Resin mineral täiteainetega
paint: green
odor: stüreen

Serviceable life / operating time at temperature 20 ° C: approximately 4 minutes
Working temperature: min. 12 ° C
drying time (at temperature 20 ° C, 50% suhteline õhuniiskus):  saab lihvida u. 20-30 minutes
hardener lisamine: 2 - 4% (optimal mixture 2,5%)
temperature resistance
Kõvenenud material: 120 ° C

use:

before using read carefully etiketil olevaid hoiatavaid tekste and järgige neid!
Objektilt, what soovite improve tuleks to remove rust, surface must be clean, dry, rasvavaba and grinded.
take required pc pahtlit a purgist out and mix this well corresponding quantity hardener.
Apply mixed material desired layer thickness.
clean tools immediately after using, if necessary nitro-vedeldiga.
after u. 20–30 minutes saab repaired spaces to bore, lihvida, saagida, raspeldada and to paint.
before paint layer mounting viimistlege middle teralisusega polüesterpahtliga (id 21661)
or Chamaeleon soft pahtliga Product ID: 21657.