külmkeevitus epoxy 2X 28G PRO-SEAL
Goods available only in e-shop
8,30€
Delivery: home 3-4wd
ADD TO BASKET
Pro Seal WELD Quick Cold Welding Compound on two part epoksüliim, which are created against pidama temperatuuridele up to +149 °C. tolerates puurimist, töötlemist or grinding. typical rakendused hõlmavad for transmission gearbox and rear jaotuskasti etc cracks parandamist, kollektorite, radiators õmbluste, valuvead etc for repairing.
replaces hot keevitust.
Features - liquid product:
Epoksüvaik paint: color dark grey or black
Epoksü hardener: grey paste
viscosity, CP:
Epoksüvaik: 600,000
Epoksü hardener: 500,00
ratio 1: 1 võrdsetes osades
Features – SEGATUNA
Serviceable life 4 minutes
full kõvenemine 4-6 minutes
maximum gap .25 "
Tensile Strength ASTM D638: 2040 psi (+-10%)
Tensile Strength ASTM D 1002, steel / steel 1072 psi (+-10%)
working temperature interval -54C up to +121C
Kõvadus, Shore D 73:
73 (after 60-minutist kõvenemist)
83 (after complete kõvenemist)
KASUTAMIS instructions
1. surfaces peaksid be clean and dry, oil- and rasvavabad.
2. Parimate tulemuste to achieve karestage surfaces smirgellapi or sandpaper.
remove entire dust.
3. mix võrdses koguses vaiku and hardener approximately 1 minutes thoroughly.
4. Apply nii surfaces and also kokkuliimitavale both part.
5. remove excessive epoxy immediately denatured piiritusega.
6. Fikseerumine 60 minutes, full kõvenemine 12–24 in hour.
replaces hot keevitust.
Features - liquid product:
Epoksüvaik paint: color dark grey or black
Epoksü hardener: grey paste
viscosity, CP:
Epoksüvaik: 600,000
Epoksü hardener: 500,00
ratio 1: 1 võrdsetes osades
Features – SEGATUNA
Serviceable life 4 minutes
full kõvenemine 4-6 minutes
maximum gap .25 "
Tensile Strength ASTM D638: 2040 psi (+-10%)
Tensile Strength ASTM D 1002, steel / steel 1072 psi (+-10%)
working temperature interval -54C up to +121C
Kõvadus, Shore D 73:
73 (after 60-minutist kõvenemist)
83 (after complete kõvenemist)
KASUTAMIS instructions
1. surfaces peaksid be clean and dry, oil- and rasvavabad.
2. Parimate tulemuste to achieve karestage surfaces smirgellapi or sandpaper.
remove entire dust.
3. mix võrdses koguses vaiku and hardener approximately 1 minutes thoroughly.
4. Apply nii surfaces and also kokkuliimitavale both part.
5. remove excessive epoxy immediately denatured piiritusega.
6. Fikseerumine 60 minutes, full kõvenemine 12–24 in hour.
10,50€
ADD TO BASKET
Delivery: home 3-4wd
15,60€
16,40€
-5%
ADD TO BASKET
Delivery: home 3-4wd
20,60€
21,90€
-6%
ADD TO BASKET
Delivery: home 3-4wd
2,50€
ADD TO BASKET
Delivery: home 3-4wd
10,50€
ADD TO BASKET
Delivery: home 3-4wd