High temperature Ceramic repair tape for pipes/ for car exhaust. Ceramic high temperature exhaust repair tape. suitable also for repairing water pipes, withstands pressure up to 20 atm. work temperature max up to +650°С. use: 1. be sure that, system has no pressure. 2. clean surface from dirt, from grease, rust, opened paint then grind and clean once more. 3. put the gloves on. open bag and Fill this with water, wait 1 minute. squeeze bag few times, so the tape moistures. 4. Take the tape out of bag and Turn tape around pipe or silencer beginning 5 cm before area what needs to be repaired. Turn 8-10 layers . use entire tape 5. Smoothen tape . 6. When tape starts to froth and bubble still continue to smoothen by pushing tape around the pipe. 7. Last phase is when ceramic band changes to slippery. +20°С degrees happens hardening after 30-40 minutes has passed. With lower temperature hardening slows , but takes no longer than 24h. 8. After hardening you may grind and paint pipe. Working temperature -60 +650°С . dimesions 10x5cm storage: keep closed bag in dry and cool place.